Installed prices per point
Price receptacles, switches, fixtures and connections as a count times an installed price per point, so an added outlet has a known price before anyone asks.
For electricians & electrical contractors
ExtraflowDoc is electrical estimating software for contractors who price a job from the drawings before they bid it. Count devices, fixtures and connections, price each point at your installed rate with your markup, keep allowances and alternates out of the base price, and send the owner or general contractor an estimate they can check against the plans, from the deal in Pipedrive or monday.com.
Free plan available. No credit card required. Or build an estimate in your browser with nothing to install.
See it in action
Explore the screenshots for a better understanding — click any screenshot to view it full-screen.
The ExtraflowDoc estimate editor
Built for how electricians estimate
An electrical estimate is checked against a drawing count by whoever receives it, and your team needs to know the labour in it is right. These six parts answer both.
Price receptacles, switches, fixtures and connections as a count times an installed price per point, so an added outlet has a known price before anyone asks.
Enter material cost and labour per point with your markup, or work back from the margin you need. Hide those columns from the client's copy; your team still sees cost and margin for the whole estimate.
Note the sheet each count came from in a table or in the line itself, so a reviewer can check the power plan, lighting plan and equipment schedule against your numbers.
Budget decorative fixtures the owner has not chosen as an allowance, and price EV chargers, patio circuits or sign power as alternates beside the total.
Show the panel load summary and the service you are sizing for, and list what stays with other trades, such as fire alarm, data and patching.
Keep each revision in the version history, then build the change orders and progress invoices on the same deal; an accepted estimate converts into an invoice in one click.
Where ExtraflowDoc fits
Many electrical estimating tools count symbols on PDFs and pull live supplier prices. ExtraflowDoc does neither; it turns the counts and prices you already have into an estimate inside your CRM.
Keep your takeoff or electrical estimating suite if you count symbols on PDFs or need live copper pricing, and bring the counts across. Use ExtraflowDoc for the estimate the owner or general contractor reads, on the deal your sales already run on.
Worked example
This is a real seven-page ExtraflowDoc estimate from an electrical contractor in Denver to the owner of a noodle bar fitting out a 2,400 square foot unit: a new 225 amp panel, 203 points counted from the drawings and a total of $55,806.00. The owner will compare it with other bids line by line, so every number traces back to a count on a named drawing sheet.
The summary gives the total, the 203 points and five weeks on site, then the three assumptions the price rests on, starting with a free 225 A position in the meter centre. A table ties each category to the drawing sheet it was counted from, the scope page names what other trades do, and a panel load summary shows 72 kVA of demand on the new service.
Receptacles, switches, dedicated circuits, fixtures and kitchen connections are each a count times an installed price per point, so an added outlet or fixture has a known price before anyone asks. Service and distribution comes to $13,060.00, and a 5% contingency of $2,660.00 sits on its own line for whatever the old shell hides.
The decorative pendants and downlights are budgeted as an allowance, not guessed at, and an EV charger, patio heaters and a sign circuit are priced as alternates outside the total. The terms bill added points at the same per-point prices and hold the price until a stated date, because copper moves.
Electrical estimate examples
A restaurant build-out estimate priced per point, the purchase order for the materials on a job, and an electrician's invoice. Click any example to open it page by page.
Commercial Electrical Estimate: Restaurant Build-Out
A 2,400 sq ft restaurant build-out: 203 points counted, a 225 A panel, per-point prices and a fixture allowance.View full exampleCustomer stories
“Game changer for our construction business. Complex estimates that used to take hours now take 10 minutes.”
“Best ROI of any software we've purchased. Paid for itself in the first week.”
“The Pipedrive integration is seamless. All our client data auto-fills perfectly.”
Integrations
ExtraflowDoc installs into Pipedrive and monday.com and opens on the deal or board item, so the estimate starts with the owner, the address and the drawings you were sent.

Open ExtraflowDoc on the bid's deal, add devices and fixtures from your Pipedrive product catalogue with your installed prices, and adjust counts per drawing. The estimate PDF and every revision stay on the deal.

If bids run on a monday.com board, start the estimate from the project's item. Its columns fill the owner, address and bid date, and each version is saved back to the item.
Pricing
Estimators, project managers and the owner of the shop share one plan. ExtraflowDoc charges by documents per month per company, so adding the foreman who prices service calls costs nothing.
$0.00/month
5 documents/month per company
$20.69/month
20 documents/month per company
$34.49/month
35 documents/month per company
FAQ
What ExtraflowDoc does for an electrician's estimate, and which jobs it leaves to other tools.
Software that turns a set of electrical drawings into a priced estimate: devices, fixtures and connections counted, labour per point, materials, markup and terms. Some tools also count symbols on PDFs; ExtraflowDoc builds the estimate itself, inside Pipedrive or monday.com.
No. It does not read PDF drawings or count symbols. Count in your takeoff tool or with a highlighter, as the example's estimator did from sheets E1.0 to E3.1, and enter the counts; ExtraflowDoc prices them.
No. There is no live price feed. Your material prices are products in your CRM catalogue; update them when your supplier's price changes and every new estimate uses the new figure.
Yes. Make each point a line with your installed price, or enter material cost and labour separately and apply your markup. Hide the cost columns and the client sees one price per point.
You can show one as a table, as the example does with connected and demand load. ExtraflowDoc does not calculate loads to code; the figures come from your engineer or your own calculation.
Budget them as an allowance with a quantity and a price per fixture, and say that the actual cost is billed. The difference becomes a written change order before ordering.
Yes. A panel upgrade or EV charger estimate for a homeowner uses the same lines and template, just fewer of them. Larger jobs add counts, a scope and a schedule.
Yes. ExtraflowDoc's free plan covers 5 documents a month per company with unlimited users, enough for a small shop estimating a few jobs a month. Paid plans start at $20.69/month for 20 documents. For a single estimate with no account, the free estimate generator runs in your browser.
Ready to price the next set of drawings?