For manufacturers & machine shops

Manufacturing quoting software for machine shops and fabricators

ExtraflowDoc is quoting software for shops that price work by the run: setup, material, machine time, and finishing on separate lines, price breaks that follow the quantity, and a quotation the customer can sign without printing anything.

  • Quotes
  • Quotations
  • Estimates
  • Proposals
  • Purchase orders
  • Work orders
  • Delivery notes
  • Invoices

Free plan available. No credit card required. Or build a quotation in your browser right now, without an account.

4.8 out of 5 from 157 reviews

Free plan, no credit cardPrice breaks by quantityE-signatures included

Built for how a shop prices work

What a manufacturing quote has to get right

Most quoting tools assume a catalogue product with a fixed price. A shop sells the same part at six different prices depending on how many you want, and that changes six things.

Setup, material, run time and finishing as separate lines

A part price is several costs wearing one number. Break it out: programming and setup as a one-off, material by weight or by bar, machine time at your hourly rate, then deburring, heat treatment, or plating as their own lines. The customer sees why the price is the price, and you see which operation is eating the margin.

One price-break table for every run size

Configure tiered pricing per product and volume-discount rules once, and the right rate applies as the quantity changes. A 50-off order and a 5,000-off order quote from the same record — no separate price list per customer, and no rep working out the break by hand at eleven at night.

Formulas for the way parts are actually costed

Calculated columns hold what a flat per-unit rate can't: quantity × cycle time × shop rate, weight × price per kilo, sheets × nesting yield. Change the run quantity and every dependent figure — and the tax — follows it.

Margin per operation, not one number on the footer

Price each line directly, from cost plus markup, or backwards from a target margin, and mix all three in one quotation. Bought-in castings can pass through at a handling percentage while your own machining holds a real margin — visible to you while you build it, invisible to the customer.

Machine, installation, training and warranty in one quotation

Capital equipment doesn't quote like a part. Put the machine, the tooling package, installation, commissioning, and operator training on one document with a cover page, an equipment gallery, and the lead time and site requirements written into the terms.

RFQ to purchase order without retyping anything

The quotation, the customer's order acknowledgement, the purchase order to your material supplier, the works order, the delivery note, and the invoice all come out of the same editor and the same line items — so the figures agree across every document by construction, not by proofreading.

Worked example

Anatomy of a real CNC machinery quotation

This is a real eleven-page ExtraflowDoc quotation for a vertical machining center with a 4th axis, probing, tooling, installation and training, totalling $232,365.00. It is a capital equipment sale rather than a part quote, and it shows what a quotation looks like when the thing being sold has a lead time, a foundation and a training plan attached to it.

Pages 2 to 5 — the application, the machine, the options and the cycle times

The quote starts from the customer's parts rather than the catalog: hydraulic manifolds, 1,800 a year, three setups per part today. A spec sheet and four option cards follow, then a cycle-time estimate that takes the part from 52 to 19 minutes, which is the number the plant manager takes to the owner.

Pages 6 and 7 — equipment, tooling and services, each with its model number

The machine and its options come to $198,000.00, tooling and workholding to $11,415.00 and services to $22,950.00: rigging, installation and a ballbar test, five days of training and a second-year warranty. The only discount, $435.00, is 10% on the tool holders, and the manufacturing tax exemption is printed on the tax line.

Payment terms that follow the machine

Thirty percent with the purchase order, sixty before shipment after the factory run-off, and the last ten percent thirty days after acceptance, which is signed when the test part is in tolerance. The buyer's leverage and yours are both written down.

Pages 8 to 11 — site preparation, lead time, the team and the terms

A floor layout with clearances, power and air, a ready-before-delivery checklist, a ten-week lead time with the training plan, an equipment gallery with the people who will install and support the machine, and terms covering lead time, site preparation, installation, training and warranty.

See the full eleven-page machinery quotation, page by page

Customer stories

From teams quoting made-to-order work

“ExtraflowDoc has been an outstanding addition to our workflow in Pipedrive. The app works seamlessly with Pipedrive, making document generation and automation incredibly smooth and easy to use. What really stands out is how much time it saves our team every single day. Honestly, the app quickly pays for itself just through its efficiency. If you use Pipedrive and want to streamline your document process, improve efficiency, and save valuable time, I highly recommend ExtraflowDoc.”

Eric W. Karpynec, Thistle Roller Co.

“Very intuitive. Our team was creating professional proposals on day one with zero training.”

Amanda Wilson, Signature Cabinetry

“I've had a great experience with ExtraflowDoc. It makes creating quotes, proposals, estimates, and contracts way easier and a lot faster. The Pipedrive integration is super helpful too since it pulls in the info you need without all the extra manual work.”

Rafael Rosas

Integrations

Quote from the RFQ record you already keep

ExtraflowDoc installs into Pipedrive and monday.com and opens inside the deal or board item — so the quotation is built where the enquiry, the drawing, and the customer history already live.

Manufacturing quoting in Pipedrive

Quote from the deal the enquiry already lives in. Customer, contact, and any custom field you map — part number, drawing revision, annual volume — flow into the quotation, and the sent PDF stays on the deal instead of in a shared drive nobody searches.

Manufacturing quoting in monday.com

If your RFQs are tracked on a monday.com board, build the quotation straight from the item. The columns you already maintain populate the document, and the finished quote is stored back against the job.

Pricing

Per company, so estimating and sales share one plan

ExtraflowDoc charges by document volume per company, not per seat — the estimator, the sales engineer, and the owner all work from the same plan at no extra cost. Start free and move up as the RFQ list grows.

Free plan

USD $0/month

Billed monthly. Unlimited users included.

5 documents/month per company

  • Estimates
  • Quotes
  • Proposals
  • Invoices
  • Agreements
  • Purchase Orders
  • Delivery Notes
  • Work Orders
  • Custom Documents
  • Templates
  • Integration with Pipedrive
  • Integration with monday.com
  • E-Signatures
  • CPQ
  • Tiered Pricing
  • Volume Discounts
  • Multiple Taxes
  • Pricing Engine for line items (Price, Price + Markup, Price + Profit Margin)

Basic plan

USD $14.99/month

Billed monthly. Unlimited users included.

20 documents/month per company

  • Estimates
  • Quotes
  • Proposals
  • Invoices
  • Agreements
  • Purchase Orders
  • Delivery Notes
  • Work Orders
  • Custom Documents
  • Templates
  • Integration with Pipedrive
  • Integration with monday.com
  • E-Signatures
  • CPQ
  • Tiered Pricing
  • Volume Discounts
  • Multiple Taxes
  • Pricing Engine for line items (Price, Price + Markup, Price + Profit Margin)

Standard plan

USD $24.99/month

Billed monthly. Unlimited users included.

35 documents/month per company

  • Estimates
  • Quotes
  • Proposals
  • Invoices
  • Agreements
  • Purchase Orders
  • Delivery Notes
  • Work Orders
  • Custom Documents
  • Templates
  • Integration with Pipedrive
  • Integration with monday.com
  • E-Signatures
  • CPQ
  • Tiered Pricing
  • Volume Discounts
  • Multiple Taxes
  • Pricing Engine for line items (Price, Price + Markup, Price + Profit Margin)

See all pricing plans, up to 600 documents/month

FAQ

Manufacturing quoting software: frequently asked questions

Including the three things ExtraflowDoc does not do — worth knowing before you install it, not after.

What is manufacturing quoting software?

It's software that turns an RFQ into a priced, professional quotation: line items for setup, material, machine time, and secondary operations, price breaks that follow the run size, and a document the customer can accept as it stands. ExtraflowDoc does that from the deal or board item the enquiry already sits in, so the quotation starts from real customer data rather than last quarter's spreadsheet.

Can ExtraflowDoc quote a part automatically from a CAD file or drawing?

No. ExtraflowDoc does not read STEP, IGES, or DXF files, has no feature recognition, and does not calculate cycle time, tool paths, or material removal from a model. It is not an automated part-costing engine. It takes over once you know the numbers — pricing them, applying margin, building the quotation, and collecting the signature. Shops generally keep their estimating spreadsheet or CAM-based costing tool for the calculation and use ExtraflowDoc for everything downstream of it.

How do I quote setup separately from the per-part price?

Put setup on its own line as a one-off charge and the parts on another priced per unit. Because the two lines are independent, the customer can see exactly what a short run costs them in setup — which is usually the most persuasive argument for the larger quantity you would rather make.

Can it handle price breaks for different order quantities?

Yes, and without a separate quotation per quantity. Tiered pricing defines the rate at each quantity band on the product itself, and volume-discount rules apply automatically once quantity crosses a threshold. Configure it once and every future quote for that part prices correctly.

Can I price material by weight, by sheet, or by bar?

Yes, with calculated columns. Add a formula column for weight × price per kilo, sheets × cost per sheet, or quantity × cycle time × shop rate, and the total recalculates when the input changes. Mixed units across one quotation are normal — material by the kilo, machining by the hour, plating by the batch.

Does it integrate with my ERP or MRP system?

Not directly. ExtraflowDoc's native integrations are Pipedrive and monday.com, and it produces PDFs you can attach to whatever your ERP expects. If the quotation has to originate inside your ERP or write back to it automatically, ExtraflowDoc isn't the right fit today — better to know that now.

Does it schedule the shop floor or check capacity before I quote a lead time?

No. ExtraflowDoc has no scheduling, capacity planning, or works-order tracking. It documents the lead time you commit to; it doesn't work out whether the machines are free. Quoting and scheduling stay separate jobs, done by separate tools.

Can I quote capital equipment — a machine with installation and training?

Yes, and it is a different document from a part quote. Put the machine, tooling, installation, commissioning, and operator training on one quotation with a branded cover page, a photo gallery of the actual equipment, and lead time, site preparation, and warranty written into the terms. There is a real four-page example of exactly that on this page.

Can I show the customer photos of the part or the machine in the quote?

Yes. Line items carry their own images, and full-page gallery blocks with descriptions sit alongside the pricing. For a machine sale that means the equipment and the team who install it; for a fabrication job it means the last one you made.

Does it handle export quotes — other currencies and tax treatments?

Yes. Pick the currency the customer pays in, apply tax per line item so mixed-rate quotations work, and combine multiple tax rules on one document. The document is also localized, so it reads correctly in your customer's market as well as yours.

Can the quotation become the purchase order and the invoice?

Yes, and that's the point of keeping them in one editor. A won quotation converts to an invoice in one click with every line carried over, and purchase orders to your material suppliers, works orders, and delivery notes come from the same document set — so the quantities and prices agree across all of them.

Is there free quoting software for a small machine shop?

ExtraflowDoc's free plan covers 5 documents a month per company with unlimited users, which suits a shop quoting a handful of RFQs a month. Paid plans start at USD $14.99/month for 20 documents. Billing is per company rather than per seat, so putting the estimator, the sales engineer, and the owner on it costs the same as one login.

Ready to answer the next RFQ?

Quote the run, not the guess — and send it the same day.